KRXNY 30A Solar Charge Controller 12V 24V Auto Battery Regulator With USB Port LCD Display
KRXNY 30A Solar Charge Controller 12V 24V Auto Battery Regulator With USB Port LCD Display by KRXNY at Energy Forum Online. MPN: 43313-2669. Hurry! Limited time offer. Offer valid only while supplies last. 1.Fully 3-stage PWM charge management 2.Dual mosfet Reverse current protection ,low heat production 3.The battery cable should be as short as
1.Fully 3-stage PWM charge management
2.Dual mosfet Reverse current protection ,low heat production
3.The battery cable should be as short as possible to minimize loss
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator
5.SYSTEM CONNECTION: Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects12V battery, 2 if it detects 24V battery
6.Connect the photovoltaic module to the regulator - plus and minus
7.Connect the consumer to the charge regulator - plus and minus
8.The reverseorder applies when deinstalling
9.An impropersequence order can damage the controller
This controller can only be used on lead-acid batteries, LCD display PWM battery charging
All necessary protections equipped
Adjustable controlling parameter of the system
Battery Voltage : 12V / 24V
Max Rated Charge Current : 30A
Discharge Current : 30A
Working Temperature : -35℃ to +60℃
Application : Home, Industrial, Commercial
Self consume : ≤10mA
Float Charge : 13V
Discharge stop :10.7V
Discharge reconnect :12.6V
Size : 133 x 70 x 32mm
12V battery can only access 18V-20V solar panels
24V battery can only access 36-40V solar panels
30A （12V/360W（MAX） 24V/720W（MAX） ）
1*Solar charge controller
Features & Highlights
- Rated Discharge Current: 30A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto & Charge Current: 30A & Discharge Current: 30A
- Adjustable power rate with dual USB ports; 3-Stage charge management and 3-Stage PWM charge LCD Display all adjustable parameter
- Funtionality: Equipped with industrial-grade control the charger and discharge process and it has reliable battery to charge and discharge period management ,Mutiple electric protection: over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
- The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL,it is not suited for nickel metal hydride, lithium ions or other batteries
- various control parameters can be flexibly set, fully meet your various application requirements.
|Manufacturer:||Ruian Karry Hardware Co.,Ltd|
|Publisher:||Ruian Karry Hardware Co.,Ltd|
|Studio:||Ruian Karry Hardware Co.,Ltd|
|Item Weight:||0.35 pounds|
|Item Size:||3.1 x 1.5 x 1.5 inches|
|Package Weight:||0.34 pounds|
|Package Size:||3.2 x 1.6 x 1.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by KRXNY, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Pack of 2 strain reliefs. Use the 3/4" threaded connectors to provide a waterproof entrance or exit for wiring on PV module junction boxes and outdoor combiner boxes. Offers flexibility to use from 1 to 4 of the available holes (seal unused holes wit...
▶Description:▶ 🌹Connectors🌹 Rated voltage: 1000 V Rated current: 25A - 14 AWG (2.5mm²), 30A - 12 and 10 AWG (4mm²,6mm²) Test voltage: 6 kV (50 Hz) Operating temperature: -40°C ~ 85°C Approvals: IP 67 protecting grade, safety ...
mpn: L03010101002-1, ean: 0632594856215,
Features Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included). Finally, brackets can be bo...
mpn: CBL-PVBL-10MC4-30, ean: 0617209854497,
Photovoltaic Wire (PV Wire) is used as a interconnection wire for photovoltaic power systems. 30-feet long 10 AWG Photovoltaic PV connection cable is ideal for connecting solar panels either in series or parallel. Features one MC4 male connector at o...
By Victron Energy
mpn: SBS050100200, ean: 8719076040118,
By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage. For lead batteries, battery temperature data is used to adjust the charge-voltages: co...
mpn: WGCD 104, ean: 0755082680243,
Specification: SAE to SAE adapter plug: Material: copper + pvc Working voltage: below 50v Outside diameter: 2.7 * 5.4 mm Length: 46mm/1.81inches Weight: Single head SAE extension cable: Material: copper wire Working voltage: 12 V Current: 10 A Power...
mpn: CBL-PVBL-10MC4-20, ean: 0617209854503,
Photovoltaic Wire (PV Wire) is used as a interconnection wire for photovoltaic power systems. 20-feet long 10 AWG Photovoltaic PV connection cable is ideal for connecting solar panels either in series or parallel. Features one MC4 male connector at o...
mpn: LY-2546B, ean: 0702679984291,
This is an industrial quality Multi-Contact Tool for Crimping MC4 Male and Female Solar Contacts. Satisfy different sizes of solar panel Pv cables(2.5/4/6.0mm2). Portable style with perfect handle gripping position,light weight, logical sructure and...
mpn: 43313-5303, ean: 0730440351065,
Compatible with 1200W(24v) solar panel with dark activated function, Max current is 50A 12V Battery supports max 600W solar panel. 24V Battery supports max 1200W solar panel. Cannot use 24V solar panel charge 12v battery, vice versa 50A Solar Panel C...
mpn: CBL-PVBL-12MC4-100, ean: 0617209854558,
Photovoltaic Wire (PV Wire) is used as a interconnection wire for photovoltaic power systems. 100-feet long 12 AWG Photovoltaic PV connection cable is ideal for connecting solar panels either in series or parallel. Features one MC4 male connector at ...